What Tool Is Best For Steel Cutting?

Shears etc. can be used.

There are many kinds of steel plate cutting methods used in daily work, which are mainly divided into cold cutting treatment and hot cutting treatment. In cold cutting, water jet cutting or ordinary shearing methods can be used.

It can be used when thermal cutting is used, such as flame cutting, plasma cutting or laser cutting. Different steel cutting methods can be selected according to the thickness and material of the steel plate. Among them, the thickness of the steel plate is one of the most important reasons that affect the cutting of the steel plate.

Among our common steel plate cutting methods, in addition to shearing, the cost of flame cutting is not high, and the operation is more flexible and free, and different shapes of steel plates can be cut. However, when cutting thin steel plates, it is easy to cause deformation, the variety of cutting materials is limited, and the technical requirements are relatively higher.

working principle

After shearing, the shearing machine should be able to ensure the straightness and parallelism of the shearing surface of the sheared plate and minimize the distortion of the plate to obtain high-quality workpieces. The upper blade of the shearing machine is fixed on the knife holder, and the lower blade is fixed on the work table. A material support ball is installed on the worktable so that the sheet will not be scratched when sliding on it.

The back gauge is used for sheet positioning, and the position is adjusted by the motor. The pressing cylinder is used to press the sheet to prevent the sheet from moving during shearing. Guardrails are safety devices to prevent workplace accidents. The return journey generally relies on nitrogen, which is fast and has a small impact.