Exciting News: Yuantai Derun's Zinc-aluminum-magnesium Series Products Were Put Into Production And Listed

Tangshan Yuantai Derun Steel Pipe Co., Ltd., a subsidiary of Yuantai Derun Group, has listed zinc-aluminum-magnesium series products and has been put into production. Since the announcement of the news, it has received enthusiastic attention from customers. The zinc-aluminum-magnesium strip steel is currently available with a width of 550 mm-1010 mm, and there are more zinc-aluminum-magnesium square tubes, zinc-aluminum-magnesium photovoltaic brackets, and other products. Now you can send an email to yuantai@yuantai-steel.com for consultation!

Yuantai Derun has been focusing on square tubes for more than 20 years. This new product is also indispensable for zinc-aluminum-magnesium square tubes. Compared with traditional hot-dip galvanized square tubes, zinc-aluminum-magnesium square tubes have greatly improved corrosion resistance and self-repair performance. , to help prolong the service life of the bracket, the advantages of the zinc-aluminum-magnesium square tube applied to the photovoltaic bracket are very significant. Its advantages are as follows:

1. Cost reduction. Zinc-aluminum-magnesium materials are pretreated by continuous galvanizing on the basis of hot rolling. After the zinc-aluminum-magnesium coating plate is processed and formed, it is directly provided for engineering use, shortening the processing period of component products, and the project construction period is well controllable. And reduce the management and labor costs required for the post-heat soaking treatment process.

2. Reducing pollution is beneficial to environmental protection. Canceling the production process of hot-dip galvanizing can reduce serious environmental pollution problems and play a positive role in environmental protection; zinc, aluminum, and magnesium products are more in line with the national requirements for green environmental protection.

3. Zinc-aluminum-magnesium has the self-healing ability of the cut section of the coating. During the use of the zinc-aluminum-magnesium material, the coating near the cut or scratch position gradually forms a dense layer composed of zinc hydroxide, alkaline zinc chloride, and magnesium hydroxide. The protective film has good adhesion, high density, and low conductivity, and can effectively separate the external corrosive medium from the bare metal substrate, thereby preventing further corrosion of the exposed cut, and has an inhibitory effect on the corrosion of the cut and scratched position.

4. The zinc-aluminum-magnesium material has stable performance, and the size of the material is easy to control, which is convenient for the standardization and mass production of photovoltaic brackets. Zinc-aluminum-magnesium materials have been used in the photovoltaic industry with good surface quality, super corrosion resistance, stable performance, good environmental performance, and low-cost advantages and have been recognized by many power companies, and have also brought good economic benefits to society benefits.